1.将住址库Xilinx_lib.rar解压到ModelSim的安装文件夹中（例Xilinx 仿真库存于C:\modeltech_6.5\Xilinx_lib）
2. 去除ModelSim的安装文件夹中的modelsim.ini文件的只读属性，打开并修改modelsim.ini文件。修改后的内容如下：
[Library]
std = $MODEL_TECH/../std
ieee = $MODEL_TECH/../ieee
verilog = $MODEL_TECH/../verilog
vital2000 = $MODEL_TECH/../vital2000
std_developerskit = $MODEL_TECH/../std_developerskit
synopsys = $MODEL_TECH/../synopsys
modelsim_lib = $MODEL_TECH/../modelsim_lib
simprim_ver = C:/modeltech_6.5/Xilinx_lib/simprim_ver
unisim_ver = C:/modeltech_6.5/Xilinx_lib/unisim_ver
xilinxcorelib_ver = C:/modeltech_6.5/Xilinx_lib/xilinxcorelib_ver
sv_std = $MODEL_TECH/../sv_std
mtiAvm = $MODEL_TECH/../avm
mtiOvm = $MODEL_TECH/../ovm-
mtiUPF = $MODEL_TECH/../upf_lib
mtiPA = $MODEL_TECH/../pa_lib
floatfixlib = $MODEL_TECH/../floatfixlib
;vhdl_psl_checkers = $MODEL_TECH/../vhdl_psl_checkers // Source files only for this release
;verilog_psl_checkers = $MODEL_TECH/../verilog_psl_checkers // Source files only for this release
;mvc_lib = $MODEL_TECH/../mvc_lib
上面红色斜体三行为新增加的内容。注意下划线即为仿真库的路径。
3. 重启modelsim。查看这3个库是否在library框里面。如果你看到了，那么恭喜!
-------------------------------------------------------------------------------------
专业,代做,代写,承接,MATLAB,SIMULINK,FPGA项目,博士,硕士,本科,毕业设计,课题设计,论文,
期刊,毕业论文,杂志,Coursework,Eassy,Assignment,ISE,QuartusII,Vivado,PlanAhead,
SystemGenerator,Verilog,VHDL,VRML,DSPBuilder,EDK,SDK,MaxplusII,PowerPC,Microblaze
专业代做/代写/承接、MATLAB、SIMULINK、FPGA项目、博士/硕士/本科毕业设计、课题设计、
论文，毕业论文，Coursework、Eassy、Assignment
QQ:122 4848 052
