您现在的位置:首页 >> 技术文章 >> 通信信号处理 >> 内容

基于ADAMS和MATLAB的翻转机构联合仿真研究

时间:2017-10-3 10:07:40 点击:

  核心提示:基于ADAMS和MATLAB的翻转机构联合仿真研究...
 建立三自由度翻转机构模型,将模型导入ADAMS中添加约束和驱动,进行运动学仿真,输出气缸回转轴和翻转板回转轴的角度变化曲线。建立翻转机构ADAMS动力学模型,创建活塞杆上端轨迹与输入输出变量,导入MATLAB/SIMULINK模块。在SIMULINK中建立控制系统,以气缸移动速度为输入指令,调整控制参数,实现活塞杆末端的既定轨迹跟踪,输出不同位置增益的响应曲线。仿真过程通过改变控制系统的参数,发现增大P可增加系统的响应速度,增大X_p可消除超调现象,减少振荡。联合仿真的研究为实际数控系统的机电耦合提供了设计依据。 The model of the three-degree-of-freedom inversion mechanism was established, and the model was introduced into ADAMS to add the constraint and drive, and the kinematic simulation was carried out to simulate the angular variation curve of the rotary shaft of the cylinder and the rotary plate.
Establish the ADAMS dynamic model of the flip mechanism, create the upper end of the piston rod trajectory and input and output variables, import MATLAB / SIMULINK module. Establish a control system in SIMULINK to gas The cylinder movement speed is the input instruction, adjusts the control parameter, realizes the trajectory tracking of the end of the piston rod, and outputs the response curve of the different position gain. The simulation process by changing the control system Parameter, found to increase P can increase the system response speed, increase X_p can eliminate the overshoot phenomenon, reduce the oscillation. The joint simulation study provides the design for the electromechanical coupling of the actual numerical control system
according to.

作者:基于ADAMS和MATLAB的翻转机构联合仿真研究 来源:基于ADAMS和MATLAB的翻转机构联合仿真研究
  • 您是如何找到本站的?
  • 百度搜索
  • Google搜索
  • 查阅资料过程中
  • 论坛发现
  • 百度贴吧发现
  • 朋友介绍
本站最新成功开发工程项目案例
相关文章
  • 没有相关文章
相关评论
发表我的评论
  • 大名:
  • 内容:
  • matlab代做|matlab专业代做|matlab淘宝代做(www.hslogic.com) © 2018 版权所有 All Rights Reserved.
  • Email:highspeed_logic@163.com 站长QQ: 1224848052

    专业代做/代写/承接、MATLAB、SIMULINK、FPGA项目、博士/硕士/本科毕业设计、课题设计、论文,毕业论文,Coursework、Eassy、Assignment