您现在的位置:首页 >> 技术文章 >> MATLAB技术 >> 内容

MATLAB代做|FPGA代做|python代做-内格尔Schreckenberg模型模拟源码程序

时间:2021-1-3 0:09:21 点击:

  核心提示:MATLAB代做|FPGA代做|python代做-内格尔Schreckenberg模型模拟源码程序...
% Nagel Schreckenberg model simulation
%Written by Alexander Farley 
%Feb 6 2012
%alexander.s.farley at gmail.com
%This script implements the Nagel Schreckenberg cellular automata based
%traffic model. Flow vs density curves are displayed. 
%
%
%Update June 5 2012: Fixed problem in vehicle velocity updates
%Update Jan 13 2013: Fixed problem with vmax=1 showing no flow
%Update June 12 2013: Corrected calculation of flow rate for FD plot
%Update Feb 9 2015: Replace mean2() and add pause() at end for compatibility with Octave. Reduce default number of simulation runs to speed up calculation. 
%
clc;
clear;
close all;

%Parameters
vmax = 6;
p = 0.6;
road_length = 40;
simulation_steps = 400;
render_on = 0;
pause_on = 0;
delay_on = 0;
delay_length = 0.05; %10 FPS

road = zeros(1,road_length);       %Contains occupation state
road_next = road;
velocities = zeros(1,road_length); %Contains velocity state
velocities_next = velocities;

%Sampling
num_samples = 200;
samples = zeros(2,num_samples); %Contains density and flow rate
density_step = 1/num_samples;

history = zeros(simulation_steps, road_length);
velocity_history = zeros(simulation_steps, road_length);

figure

for g=1:num_samples
    
    %Generate traffic
    road = zeros(1,road_length);       %Contains occupation state
    road_next = road;
    density = g/num_samples;
    
    %Generate traffic
    
for i=1:road_length
    if rand < density 
        road(i) = 1;
    end
end

    if render_on
    imshow(road);
    drawnow
    end
    
    %Run simulation
for i=1:simulation_steps
    history(i, :) = road;
    velocity_history(i,:) = velocities;
           %--------------------Velocity update ------------------------%
    for j=1:road_length
       if road(j) == 1
           distance = 0;
           %Seek vmax ahead
           bf = 0;
           for k=1:vmax
               distance = k;
              
               if j+k <= road_length %The index is the "cell under consideration" - is it safe to land here?
                   index = j+k;
               else
                   index = j+k-road_length; %Deal with wrapping
               end
               
               if road(index) == 1 
                   bf = 1;
               end
               
               if bf == 1, break, end
           end
            
           if velocities(j) < vmax %Acceleration
               velocities(j) = velocities(j) + 1;
           end
           
           if (velocities(j) > distance - 1) && bf == 1 %Collision avoidance
               velocities(j) = distance - 1;
           end
           
           if rand < p && velocities(j) > 0 %Random braking
               velocities(j) = velocities(j) - 1;
           end
           
           
       end
    end
    
    %--------------------Movement -------------------------------%
    for j=1:road_length
        if road(j) ==1
            if j+velocities(j) <= road_length
                index = j+velocities(j);
            else
                index = j+velocities(j) - road_length; %Deal with wrapping
            end
            %Collision detection
            if road_next(index) == 1
                disp('Collision detected')
            end
            road_next(index) = 1;
            velocities_next(index) = velocities(j);
        end
    end
    
    velocities = velocities_next;
    
    road = road_next;
    road_next = zeros(1,road_length);
    
    if render_on
    imshow(road);
    drawnow
    end
    
    if pause_on
        pause
    end
    
    if delay_on
        pause(delay_length)
    end
    
end

    %Record density and flow rate
    velocity_history = velocity_history.*history;
    samples(:,g) = [mean(history(:)) (sum(velocity_history(:))/sum(history(:)))*mean(history(:))];
    
    disp('Sample step:')
    g
end
    
scatter(samples(1,:), samples(2,:));
axis([0 1 0 1]);
xlabel('Density')
ylabel('Flow (normalized)')
title('Nagel Schreckenberg Flow-density Curve')

%imshow(history)

pause

联系:highspeedlogic

QQ :1224848052

微信:HuangL1121

邮箱:1224848052@qq.com

网站:http://www.mat7lab.com/

网站:http://www.hslogic.com/

微信扫一扫:

作者:Schreckenberg 来源:Schreckenberg
  • 您是如何找到本站的?
  • 百度搜索
  • Google搜索
  • 查阅资料过程中
  • 论坛发现
  • 百度贴吧发现
  • 朋友介绍
本站最新成功开发工程项目案例
相关评论
发表我的评论
  • 大名:
  • 内容:
  • matlab代做|matlab专业代做|matlab淘宝代做|python人工智能代做|FPGA项目合作|C代做|C++代做(www.hslogic.com) © 2021 版权所有 All Rights Reserved.
  • Email:highspeed_logic@163.com 站长QQ: 1224848052

    专业代做/代写/承接、MATLAB、SIMULINK、FPGA项目、博士/硕士/本科毕业设计、课题设计、论文,毕业论文,Coursework、Eassy、Assignment